How to maintain an embroidery machine?


No matter how good an embroidery machine brand manufacturer is, if it is not maintained correctly, it will be difficult to achieve an expected return in the later production income. Therefore, maintenance is very important.

.

 

A good embroidery machine does not mean that the faster the speed, the better. It is not the standard for judging whether it is good or bad. It depends on the time of use, that is, the length of life. However, no matter how good an embroidery machine brand manufacturer is, if it is not maintained correctly, it will be difficult to achieve an expected return in the later production income. Therefore, maintenance is very important.

It is carried out by the embroiderer. It takes 5 to 10 minutes for ordinary embroidery machine parts to carefully inspect the equipment, and 10 to 15 minutes for key embroidery machine parts to carefully inspect the equipment. It is necessary to wipe all parts of the machine and add lubricating oil to keep the equipment tidy, tidy, lubricated and safe, which is conducive to the smooth operation of the machine. At present, the main maintenance parts of the embroidery machine are the main shaft gearbox, thread trimming and hooking structure, thread adjustment structure, color-changing structure, X-axis guide rail drive, Y-axis guide rail drive, thread clamping structure, and embroidery frame structure.

In fact, many embroidery factory operators don't pay much attention to the maintenance cycle of embroidery machines. Embroidery factories only think of maintenance when the machine fails. Only by mastering the maintenance time of various parts of the embroidery machine, can the machine operate more smoothly and effectively improve the efficiency of the machine.

1. Use a brush to clean the hook, bobbin case, and bobbin of the thread hook structure, and try not to use sharp tools to clean it.

2. Clean up debris and thread ends at the threaded rod, thread path and felt of the thread adjustment structure

3. The rotating wheel of the thread clamping structure, the threaded adjustment, the adjustment spring, and the adjustment thread should be cleaned frequently

4. Cleaning scissors, tape measure, tape, embroidery needles, etc. on the worktable and the surface of the embroidery frame.

5. Frequently wipe the surface of the computer and the exhaust fan, open the back cover to clean up the dust.

6. The power box and drive box also need to wipe the dust frequently to keep it clean.

As a hat embroidery machine supplier, Zhuji Zhiyu Machinery Co., Ltd. is committed to producing cap embroidery machines and other types of embroidery machines. If you are interested in our products, please send an email or click on the link for more information.