forest king log splitter parts is also called wood crusher, which integrates slicing and crushing. It can cut branches and branches with a diameter of 1--20 cm. It is mainly used for processing pine, miscellaneous wood, poplar, fir, raw bamboo and other materials. It is more suitable for the processing of wood chips in edible mushroom culture medium. At the same time, the equipment can also be used for cutting chips of fibrous stalk-like materials such as bamboo, thatch, corn stalk, and sorghum stalk. Anything will have some problems during use. Some minor problems users can find solutions on their own, but some problems require our professionals to answer questions. The key is the maintenance method of the equipment. What are the common maintenance methods of the branch crusher?
- Check the branch shredder before purchasing. It is important to choose a good manufacturer. Not only is the quality guaranteed, but every aspect of the after-sales service is very reliable. Don't buy cheap equipment so you can buy inferior equipment. Lose it and it's still yours.
- The branch crusher should be lubricated regularly, and the lubrication should be dry oil lubrication. Add a special grade of Swedish SKF special grease, the quantity is 1/2-2/3 of the bearing cavity, and add an appropriate amount of grease every six months.
The start-up sequence of the whole set of equipment is: screening machine→host→feeding. The wood chipper must be started at no load and can be fed after the mill is running normally. The shutdown sequence is the reverse of the startup sequence.
- Arrange professionally trained operators to operate correctly so as not to damage the branch crusher.
- Communicate with our service center in a timely manner, ask what questions are raised as soon as possible, and we will solve any problems in the operation of the tree shredder.
Therefore, in your daily work, you must be proficient in the operation of the performance built 13 ton log splitter device. Many users don't pay much attention to details. This led directly to the failure. Before starting the machine, you need to perform a complete inspection of the equipment to ensure that all parts of the equipment are in good condition.