The place to adjust different sizes of seeds is on the vegetable Planting Machine. There is a handball on one side of the seeder. This handball controls the partition of the seeder. There is a gap on the partition. For planting small vegetable seeds, the gap of the partition is adjusted downward to plant large vegetable seeds. During operation, pull the ball outward to rotate the partition. I am talking about the principle. For example, when we plant small seeds, the spoon wheel sometimes has For two vegetable seeds, the gap of the seed metering device partition is adjusted upward to allow the spoon wheel to take the vegetable seeds a certain distance to form a slope. The vegetable seeds on the spoon wheel will fall with gravity, leaving only one seed. Of course, we have to adjust it back when sowing large seeds, otherwise holes will occur, which means that the distance of large vegetable seeds in the metering device will be shorter, which is why double seedlings or empty seedlings will appear after sowing. ,
The above is to adjust the seed metering partition of the Vegetable Planter. If you still don’t understand, take a look at the transparent shell.